Search results for: 'cabl+manual+oper+by+1+model'

VD909L   Mini-loop exit sensor

Slimline version of 'Dynamite' vehicle sensors with 3 sensitivity adjustments.

100m drum of single core rubber loop cable for use with: VD907, VD906, VD955 detectors

The VD907 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

The VD906 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

The VD961A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

The VD963A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

DSE are security devices for protecting perimeters such as patio doors or shopfronts. Two or more beams must be broken to trigger an alarm. A jumper link selects one of two frequencies to allow two sets to be used near each other

DSA are dual purpose, for security or for safety, selected by jumper. Beams are parallel and crossing to create a multi beam matrix. Only one beam needs to be broken to switch the output.